Pause the demolition
Ripping out mouldy drywall without containment sends spores through the house, into the HVAC system and onto everything nearby. Stop, close the room off, and turn off the HVAC or close the vents in that area. If anyone working there has breathing problems, they should leave the area.
Work out the size and cause
- How big is the affected area? Measure it.
- Is the material still wet? A moisture meter tells you if the leak is active.
- What caused it: an old plumbing leak, a shower pan, a roof or window leak, condensation?
- Is there damage to framing, such as soft or dark wood?
Who does what
For small areas, a careful contractor can remove the material with plastic sheeting, an N95 or better respirator and bagging as they go. For 25 square feet or more in Texas, the remediation needs a licensed assessor's protocol and a licensed remediator, separate from each other. Your remodelling contractor then rebuilds once the area has passed clearance.
Adjust the plan
Fix the moisture source as part of the remodel, not after: re-slope a shower pan, replace old supply lines, add an exhaust fan vented outside, or correct flashing. Build in time for drying; enclosing framing with high moisture readings can trap the problem again behind brand-new walls.
Common questions
Does the contractor have to stop?
A careful contractor will pause, contain the area and help you get the right people involved. Ask them how they plan to handle it before they continue.
Will it delay my project?
Often by days to a couple of weeks, depending on the size and whether a licensed protocol is needed. Fixing it during the remodel is still much cheaper than opening finished walls later.
Can the remodeller do the remediation?
For small areas, possibly. For 25 square feet or more in Texas, it must be a licensed remediation company working to an independent assessor's protocol.
